6. 4G LTE communication module
WARNING
Before starting the system, you must obtain a special SIM card that has a public
IP address and allows port forwarding. To make this possible, you need to
purchase the appropriate additional service in subscription plans, e.g.
"blueconnect bu DATA option". To activate these services, contact your
network operator.
We recommend a SIM card with a fixed IP address and no data limits, e.g.
CAMSAT "simCAM" cards - more at
6.1. SIM card installation
Remove the adapter with the camera by unscrewing the 4 Al-
len screws. This will allow access to the SIM1 and SIM2 card
slots. Aftern inserting the SIM card, reattach the camera and
tighten the screws.
6.2. Configuring the device
•
Start the iCAM-MobileHD system by turning the key in the ignition. Connect to the mo-
bile camera by connecting to a wireless network
(default SSID: CAMSAT password: camsat.com)
•
Go to 192.168.1.1 on your computer and then log in by entering your login and pas-
sword
Login:
admin
Password:
camsat
•
Change the user’s password in the System > Administration menu. Choose a strong
password to protect against unauthorized access. CAMSAT is not responsible for hac-
king into unsecured devices or networks.
•
Perform basic configuration of the LTE module. In the Network > Modem menu comple-
te the fields regarding the APN access point name and SIM card PIN, and save the
changes.
Page 23
