UTA-151 User Manual
© Camrivox Ltd. 2006
Page 4 of 20
2.4. Connecting the UTA-151 for the first time
The UTA-151 should be connected as shown in the single page Installation Sheet provided in
the packaging. Please refer to these instructions for help on cabling.
The Installation Sheet shows the UTA-151 connected inline with a PC, and this is often the
easiest way to install the UTA-151. By taking the existing Ethernet cable going to the PC and
using it for the UTA-151, you can be more certain that the Internet connection is valid.
However, if it is not convenient for you to install the UTA-151 in this network orientation,
you are free to connect it in any manner as long as the PC and the UTA-151 are on the same
local network.
Once the cables are connected you can use the telephone and UTA 151 to make normal
“PSTN” calls over your land line. But in order to take advantage of VoIP you must configure
the UTA-151.
Once the UTA-151 and PC are on the same network and powered, a window should appear
from the
Voice Connect
application on the PC asking if you wish to configure the UTA-151.
Select the option to
Configure Now
and a Web Browser will be launched to configure the
unit:
2.5. Configuration
instructions
Step 1
– Select your country.
The UTA-151 will automatically detect which country you are
in, but if you wish you can override this by choosing an alternative country from the pull-
down menu. Once you are happy with your country selection, select “next”.
If your server provider is not automatically selected – follow
step 2
else move to
step 3
.
Step 2
– Select service provider.
Select your service provider from the drop down list
provided. If you service provider is not shown you can enter details for your service provider
by clicking on the manual settings link.
Step 3
– Enter user name and password.
You must now configure your VoIP account settings
so that you can make voice calls over the Internet. Your supplier should have provided you
with a user name and password, either by email or by post. Enter these details along with
(optionally) your own name into the web page, then select “next”.
The above is the only configuration required in order to use your UTA-151. Subsequent
telephone calls will now default to using VoIP instead of PSTN (land line). You can confirm
that the VoIP connection is working by checking that the VoIP LED indicator has stopped
flashing or by returning to the main menu page to see a Green tick and the message “UTA-
151 is connected and working properly, for more information click here.” in the messages
area.
VoIPon Solutions www.voipon.co.uk [email protected] Tel: +44 (0) 1245 600560