background image

Service Instructions

Handling a frozen washing machine

Storing the washing machine

If the temperature drops below 0℃ and your washing machine is frozen, you 

can:

1.

 Unplug the washing machine.

2.

 Wrap up the faucet with the towel soaked in warm water and pour warm water on it to 

unfreeze the water supply hose.

3.

 Remove the water supply hose and soak it in warm water.

4. 

Pour warm water into the washing machine drum and let it sit for 10 minutes.

5.

 Reconnect the water supply hose to the water faucet and check if the water supply and 

drain operations are normal.

If  you  need  to  store  your  washing  machine  for  a  long  time,  please  drain  the 

residual water out from the machine. Otherwise, the residual water will remain 

in your washing machine for a long time and damage your machine.

When  using  the  washing  machine  again,  please  make  sure  that  the 
ambient temperature is above  0 ℃

1. 

Select the Spin program to drain the water out with the fastest speed.

2.

 Turn off the water faucet and separate the water supply hose.

3.

 Unplug the washing machine and open the machine door to allow ventilation.

Summary of Contents for WM80LS




































Reviews: