TDR200-Based Time-Domain Reflectometry System
4
8. Select the probe from the list on the left panel, confirm the parent device
and device type, and click
Ok
.
9. In the right pane, enter the
Cable Length
(required).
Cable Length
,
Window Length
,
Probe Length
, and
Probe Offset
settings will be
automatically entered when using the Calibration Wizard (Appendix
).
Before using the Calibration Wizard, physically connect all
multiplexers and sensors the way they will be permanently
deployed. Then add multiplexers and sensors in the Network
tab to match the physical setup. This will ensure that the
Calibration Wizard determines all measurement parameters
correctly.
10. Select
to generate a CRBasic program.
NOTE