Campbell SI-111, Product Manual, Page: 10 / 22

SI-111 and SI-111SS Precision Infrared Radiometers
2
4. QuickStart
A video that describes datalogger programming using Short Cut is available at:
www.campbellsci.com/videos/cr1000x-datalogger-getting-started-program-
part-3
. Short Cut is an easy way to program your datalogger to measure the
sensor and assign datalogger wiring terminals. Short Cut is available as a
download on www.campbellsci.com . It is included in installations of
LoggerNet , PC200W , PC400 , or RTDAQ .
The following procedure also describes programming with Short Cut .
1. Open Short Cut and select to create a new program.
2. Double-click the datalogger model.
3. In the Available Sensors and Devices box, type SI-111SS or locate the
sensor in the Sensors | Temperature folder. Double-click SI-111SS
Precision Infrared Radiometer . Target temperature defaults to degree C.
This can be changed by clicking the Deg C box and selecting Deg F , for
degrees Fahrenheit, or K for Kelvin. Enter the mC0, mC1, mC2, bC0,
bC1 , and bC2 values listed on the calibration sheet. These values are
unique to individual sensors.