Campbell MMW-005 Instruction Manual Download Page 2

 
 
 
 

 

WARRANTY AND ASSISTANCE

 

 
 
This equipment

 

is warranted by CAMPBELL SCIENTIFIC (CANADA) CORP. (“CSC”) to 

be free from defects in materials and workmanship under normal use and service for 

twelve (12) months

 from date of shipment unless specified otherwise.  

***** Batteries 

are not warranted. *****

 CSC's obligation under this warranty is limited to repairing or 

replacing (at CSC's option) defective products.  The customer shall assume all costs of 
removing, reinstalling, and shipping defective products to CSC.  CSC will return such 
products by surface carrier prepaid.  This warranty shall not apply to any CSC products 
which have been subjected to modification, misuse, neglect, accidents of nature, or 
shipping damage. This warranty is in lieu of all other warranties, expressed or implied, 
including warranties of merchantability or fitness for a particular purpose.  CSC is not 
liable for special, indirect, incidental, or consequential damages. 
 
Products may not be returned without prior authorization.  To obtain a Return 
Merchandise Authorization (RMA), contact CAMPBELL SCIENTIFIC (CANADA) CORP., 
at (780) 454-2505.  An RMA number will be issued in order to facilitate Repair Personnel 
in identifying an instrument upon arrival.  Please write this number clearly on the outside 
of the shipping container.  Include description of symptoms and all pertinent details. 
 
CAMPBELL SCIENTIFIC (CANADA) CORP. does not accept collect calls. 
 
Non-warranty products returned for repair should be accompanied by a purchase order to 
cover repair costs. 
 
 
 
 
 
 
 
 

 

 
 

Summary of Contents for MMW-005












Reviews: