GPS16X-HVS GPS Receiver
16
likely need to go outside to obtain a better signal. If you see “garbage”
characters coming in (that is, non-NMEA strings), there is likely a baud rate
mismatch.
9.2 NMEAStrings Variable Populated, but Clock Not Setting
Look at the GPSReady variable. It will increment from 0 to 10 when the data
logger has received good GPRMC strings and a synchronized PPS signal. Once
GPSReady reaches 10, the data logger will begin to use GPS time for clock
setting. The 12th value populated in GPSArray indicates elapsed time since a
GPRMC string was received and should not exceed 1. If the GPRMC string is
being received and GPSReady remains at zero, the PPS signal is not being
received by the data logger.
