Campbell CSAT3B, Instruction Manual, Page: 17 / 88

CSAT3B Three-Dimensional Sonic Anemometer
FIGURE 4-7. CPI and power connections to a CR6 datalogger
3. Use
LoggerNet
,
PC400
, or
PC200W
to send a datalogger program to the
datalogger. See Section 8.4, Datalogger Programming using SDM or
CPI , for more information on datalogger instructions and programming.
4. Verify that measurements are being made by ensuring the green Status
light (FIGURE 4-8) on the CSAT3B block is blinking, indicating that
measurements are being made and recorded in the datalogger without
diagnostic error conditions.
FIGURE 4-8. Lit status light on CSAT3B block
7