Campbell CS650, User Manual

Page: 14 / 56

CS650 and CS655 Water Content Reflectometers
2
4. Quickstart
Short Cut is an easy way to program your datalogger to measure the CS650 and
assign datalogger wiring terminals. The following procedures show using Short
Cut to program the CS650.
1. Install Short Cut by clicking on the install file icon. Get the install file from
either www.campbellsci.com , the ResourceDVD, or find it in installations of
LoggerNet , PC200W , PC400 , or RTDAQ software.
2. The Short Cut installation should place a shortcut icon on the desktop of your
computer. To open Short Cut , click on this icon.
3. When Short Cut opens, select New Program .