Campbell CR850, Operator'S Manual, Page: 46 / 566

Section 4. Quickstart Tutorial
46
Table 3. PC200W EZSetup Wizard Example Selections
Start the wizard to follow table entries.
Screen Name Information Needed
Communications Test
A communications test between the CR800 and PC can be
performed in this screen.
For this tutorial, the test is not required. Press
Finish to exit the
wizard.
After exiting the wizard, the main PC200W window becomes visible. The
window has several tabs available. By default, the Clock/Program tab is visible.
This tab displays information on the currently selected CR800 with clock and
program functions. The
Monitor Data or Collect Data tabs may be selected at
any time.
A number of icons are available across the top of the window. These access
additional functions available to the user.
4.2.4 Write Program with Short Cut
Short Cut Programming Objectives:
This portion of the tutorial will use Short Cut to create a program that measures
the CR800 power supply voltage, wiring-panel temperature, and ambient air
temperature. The CR800 will take samples once per second and store averages of
these values at one minute intervals.
See More!
http://www.youtube.com/playlist?list=PLCD0CAFEAD0390434&feature=plcp
4.2.4.1 Procedure: (Short Cut Steps 1 to 6)
1. Click on the Short Cut icon in the upper-right corner of the PC200W window.
The icon resembles a clock face.
2. A new window will appear showing the option to create a new program or
open an existing program. Click New Program .
3. The Select Datalogger Model menu appears. Select CR800 .
4. The program now prompts for the scan interval. Set the interval to 1 second
and click OK .
Note The first time Short Cut is run, a prompt will appear asking for a choice of
ac Noise Rejection . Select 60 Hz for the United States and other countries using
60-Hz ac voltage. Select 50 Hz for Europe and other countries operating on 50-Hz
ac voltage.
5. A second prompt lists sensor support options. You should probably click
Campbell Scientific, Inc . if you are outside of Europe.
6. Under Available Sensors and Devices , expand the Sensors folder by clicking
on the + symbol. This shows several sub-folders. Expand the Temperature
folder to view the available sensors.