Campbell CR850, Operator'S Manual, Page: 109 / 566

Section 7. Installation
109
sensors and external devices. Quickstart Tutorial
(p. 33)
works through a
measurement example using Short Cut .
For many complex applications, Short Cut is still a good place to start. When as
much information as possible is entered, Short Cut will create a program template
from which to work, already formatted with most of the proper structure,
measurement routines, and variables. The program can then be edited further
using
CRBasic Program Editor .
7.7.1.2 CRBasic Editor
CR800 application programs are written in a variation of BASIC (Beginner's All-
purpose Symbolic Instruction Code) computer language, CRBasic (Campbell
Recorder BASIC).
CRBasic Editor is a text editor that facilitates creation and
modification of the ASCII text file that constitutes the CR800 application
program.
CRBasic Editor is a component of LoggerNet
(p. 548),
RTDAQ
,
and
PC400 datalogger-support software
(p. 76)
packages.
Fundamental elements of CRBasic include:
•
Variables - named packets of CR800 memory into which are stored values
that normally vary during program execution. Values are typically the result
of measurements and processing. Variables are given an alphanumeric name
and can be dimensioned into arrays of related data.
•
Constants - discrete packets of CR800 memory into which are stored specific
values that do not vary during program executions. Constants are given
alphanumeric names and assigned values at the beginning declarations of a
CRBasic program.
Note Keywords and predefined constants are reserved for internal CR800 use. If
a user-programmed variable happens to be a keyword or predefined constant, a
runtime or compile error will occur. To correct the error, simply change the
variable name by adding or deleting one or more letters, numbers, or the
underscore (_) from the variable name, then recompile and resend the program.
CRBasic Editor Help provides a list of keywords and pre-defined constants.
•
Common instructions - Instructions (called "commands" in BASIC) and
operators used in most BASIC languages, including program control
statements, and logic and mathematical operators.
•
Special instructions - Instructions (called "commands" in BASIC) unique to
CRBasic, including measurement instructions that access measurement
channels, and processing instructions that compress many common
calculations used in CR800 dataloggers.
These four elements must be properly placed within the program structure.
7.7.1.2.1 Inserting Comments into Program
Comments are non-executable text placed within the body of a program to
document or clarify program algorithms.
As shown in CRBasic example Inserting Comments
(p. 110),
comments are inserted
into a program by preceding the comment with a single quote ( ' ). Comments can
be entered either as independent lines or following CR800 code. When the CR800
compiler sees a single quote (
' ), it ignores the rest of the line.