Campbell CR800 Series, Operator'S Manual, Page: 425 / 598

Section 8. Operation
425
long filename, memory allocated to the root directory can be exceeded before the
actual memory of storing files is exceeded. When this occurs, an "insufficient
resources or memory full" error is displayed.
8.8.6 File System Errors
Table File System Error Codes
(p. 425)
lists error codes associated with the CR800
file system. Errors can occur when attempting to access files on any of the
available drives.
File System Error Codes
Error Code Description
1
Invalid format
2 Device capabilities error
3
Unable to allocate memory for file operation
4 Max number of available files exceeded
5
No file entry exists in directory
6
Disk change occurred
7 Part of the path (subdirectory) was not found
8
File at EOF
9 Bad cluster encountered
10 No file buffer available
11
Filename too long or has bad chars
12 File in path is not a directory
13
Access permission, opening DIR or LABEL as file, or trying
to open file as DIR or mkdir existing file
14 Opening read-only file for write
15 Disk full (can't allocate new cluster)
16
Root directory is full
17 Bad file ptr (pointer) or device not initialized
18
Device does not support this operation
19 Bad function argument supplied
20 Seek out-of-file bounds
21
Trying to mkdir an existing dir
22 Bad partition sector signature
23 Unexpected system ID byte in partition entry
24
Path already open