Campbell CR6 Series, Operator'S Manual

Page: 634 / 690

Appendix A. Info Tables and Settings
634
PakBus
EncryptionKey
String
• Settings Editor:
Datalogger | PakBus Encryption Key
Encryption key; 0 to 63 characters
PakBusNodes Discontinued; aliased to CommsMemAlloc
PakBusPort Numeric Y
• Settings Editor: Network Services | PakBus/TCP Service Port
Specifies the TCP service port for PakBus communications if the PPP service is enabled.
Unless firewall issues exist, this setting probably does not need to be changed from its
default value. Default 6785.
PakBusRoutes
String Y
• Settings Editor: Advanced | Route Filters
•
Status
table field: ≈45
Lists routes or router neighbors known to the CR6 at the time the setting was read. Each
route is represented by four components separated by commas and enclosed in parentheses:
(port, via neighbor adr, pakbus adr, response time). Default = (1, 4089, 4089, 1000) .
Updates when routes are added or deleted.
PakBusTCP
Clients
String
•
Settings Editor: Network Services | PakBus/TCP Clients
Up to four addresses specifying outgoing PakBus/TCP connections for the CR6 to maintain.
PakBusTCP
Enabled
Numeric
•
Settings Editor: Datalogger | PakBus/TCP Password
Enables ( True [default]) or disables ( False ) the PakBus TCP service.
PakBusTCP
Password
String
• Settings Editor:
Datalogger | PakBus/TCP Password
When active (not blank), a log-in process using an MD5 digest of a random number and this
password must take place successfully before PakBus communications can proceed over an
IP socket.
PanelTemp FLOAT Y
•
Station Status field: Panel Temperature
•
Status table field: 12
Current wiring-panel temperature (°C). Measurement is made in auto self-calibration. When
auto self-calibration executes (once per minute).
PingEnabled Numeric
•
Settings Editor: Network Services | Ping (ICMP) Enabled
Enables ( True [default]) or disables ( False ) the ICMP ping service.
PortConfig()
String Y
•
Status table field: ≈43
Sets up C terminals in numeric order of terminals. Set up for input, output, SDM, SDI-12,
COM port. Default = Input . Updates when the port configuration changes.
PortStatus() Numeric
• Status table field: ≈42
States of C terminals configured for control. On/high ( True ) or off/low ( False ). Array
elements in numeric order of C terminals. Default = False . Updates when state changes.