Campbell CR510, Operator'S Manual

Page: 40 / 264

SECTION 1. FUNCTIONAL MODES
1-10
TABLE 1.6-1. Description of
∗∗∗∗
B Mode Data
Keyboard Display
Entry ID: Data Description of Data
∗
B
01: XXXXX Program memory Signature. The value is dependent upon the
programming entered and memory allotment. If the program has
not been previously compiled, it will be compiled and run.
A
02: XXXXX Operating System (OS) Signature
A
03: XXXXX Memory Size, Kbytes (Flash + SRAM)
A
04: XX Number of E08 occurrences (Key in 88 to reset)
A
05: XX Number of overrun occurrences (Key in 88 to reset)
A
06: X.XXXX Operating System version number
A
07: XXXX. Version revision number
A
08: X.XXXX Lithium battery voltage (measured daily)
A
09: XX Low 12 V battery detect counter (Key in 88 to reset)
A
10: XX Extended memory error counter (Key in 88 to reset)
A
11: X.XXXX Extended Memory time of erase, seconds
TABLE 1.7-1.
∗∗∗∗
C Mode Entries
SECURITY DISABLED
Keyboard Display
Entry ID: Data Description
∗
C
01:XXXX Non-zero password blocks entry to
∗
1,
∗
2,
∗
3,
∗
A, and
∗
D
Modes.
A
02:XXXX Non-zero password blocks
∗
4,
∗
5, and
∗
6 except for display.
A
03:XXXX Non-zero password blocks
∗
5,
∗
6,
∗
7,
∗
8,
∗
9,
∗
B, and all
telecommunications commands except A, L, N, and E.
SECURITY ENABLED
Keyboard Display
Entry ID: Data Description
∗
C
12:0000 Enter password. If correct, security is temporarily unlocked
through that level.
A
01:XX Level to which security has been disabled.
0 -- Password 1 entered (everything unlocked)
1 -- Password 2 entered
2 -- Password 3 entered