Campbell CR1000X, Product Manual, Page: 38 / 238

3.2 Testing communications and
connecting
3.2.1 Completing EZSetup
1. Using data logger support software EZ Setup, access the Communication Test window. This
window is accessed during EZ Setup (see USB or RS-232 communications (p. 17) for more
information). Alternatively, you can double-click a data logger from the station list to open
the EZ Setup Wizard and access the Communication Test step from the left side of the
window.
2. Ensure the data logger is connected to the computer, select Yes to test communications,
then click Next to initiate the test. To troubleshoot an unsuccessful test, see Tips and
troubleshooting (p. 112).
3. With a successful connection, the Datalogger Clock window displays the time for both the
data logger and the computer.
l
The Adjusted Server Date/Time displays the current reading of the clock for the
computer or server running your data logger support software. If the Datalogger
Date/Time and Adjusted Server Date/Time don't match, you can set the data logger
clock to the Adjusted Server Date/Time by clicking Set Datalogger Clock.
3. Setting up the data logger 22