Table 8-1: Setup Button Status LED
Status LED
CCFC state
Other
Rapid Flash
Exit from low power state. The camera is
kept on by:
l
Timeout (from the Setup Button
press)
l
Network Communications
l
Asserted External Trigger
l
Photo or video acquisition
Continuously On
The camera is booting up – this process
takes approximately 90 sec.
The camera will be required to
restart whenever:
l
Power is first applied to
it.
l
Camera is exiting the
Off Power mode to
perform an operation.
8.2.2 Setup button
The Setup Button (
(p. 14)) is used to wake the camera from any of the power saving
modes. Once the Setup Button is pushed, the CCFC enters a fully powered mode for 5 minutes.
During this interval, the camera can be accessed via Ethernet, Wi-Fi, or RS-232/485 to make any
necessary configuration changes. If no communication occurs during the 5-minute window, the
camera will return to its configured power saving mode and continue normal operation. Any
button press, web interface, or FTP access resets the timer, keeping the camera awake for
another 5 minutes, on both the wireless and Wi-Fi connections.
The secondary function of the Setup Button is to facilitate a power down procedure. If the button
is held for 10 seconds, the camera will completely shut down for a period of 10 minutes. After the
10 minutes, the camera will power up again. This function is also available through the web
interface via the power icon (green) in the top right corner on the desktop version. On the mobile
version of the web interface, a Power Off navigation option appears at the bottom of the sidebar.
8.3 Camera memory
The CCFC is equipped with 16 GB of internal memory.
CCFC Field Camera
16