14.9.5.3 Update
Use Update to update the firmware in the camera. It is recommended that you regularly check
for firmware updates on the Campbell Scientific website
to ensure
that the camera has the most recent version of firmware.
FIGURE 14-52. Update
Once a file is downloaded, click on the Browse button to select the new firmware update with the
tar.gz file extension. Once the proper file is selected, click on the Upload button and the process
begins.
WARNING:
During the update process DO NOT disconnect power, close web browser, or navigate away
from the Update page. Once the update is downloaded, unzip the .tar.gz file and save to the
desired location. DO NOT uncompress the .tar.gz file; send as is to camera.
Once the firmware update process is completed, the Dashboard is displayed indicating that the
process is complete. The camera reboots itself. It will take a few minutes for the camera to
operate normally. If connecting to the camera via Ethernet, the web interface automatically
refreshes when the camera is up and running again. If connected to the camera via Wi-Fi, the
connection will need to be reestablished before connecting to the camera by refreshing the
browser.
The firmware update process normally keeps all configuration settings in the camera. However, it
is recommended to verify the settings after an update.
CCFC Field Camera
106
