Campbell CCFC Field Camera, Instruction Manual

Page: 54 / 127

CCFC Field Camera
40
Figure 12-11 External Trigger: Create New Profile
TABLE 12-6 External Trigger Variables for Photos
Variable Allowable
Values
Description
Enable
+ Opens External Trigger:Create New Profile to add
parameters.
Title
Text Name the setting in order to navigate to it at a later
date. Also acts as a directory name in the
File
Explorer see section 12.7 File Explorer.
External
Trigger
Active High Configures External Trigger to capture on a positive
voltage.
Active Low Configures the External Trigger to capture with 0
volts.
Lens Position
Checkbox Select 1- 4 lens positions for the capture. See Section
12.5
Lens Position. Selecting the green position title
opens the Lens Position modal.
Enable Photo
Capture
Toggle Initiates the capture of photos and opens the photo
capture settings.
Take a Single
Photo Set to capture one photo at the set time.
Take a Series of
Photos Enter the Number of Images and Interval in Seconds
(time between photos) to create a photo burst.
Maximum allowable value is 60. This applies to each
lens position, so with all 4 lens positions activated, it
will take 240 photos.