Campbell CCFC Field Camera, Instruction Manual

Page: 49 / 127

CCFC Field Camera
35
TABLE 12-4 Timed Capture Variables for Photos
Variable Allowable
Values
Description
Enable
+ Opens Timed Capture : Create New Capture to add
parameters.
Title
Text Name the setting in order to navigate to it at a later
date. Also acts as a directory name in the
File Explorer
see section 12.7 File Explorer.
Schedule
Continuous
(24hours) Allows media to be captured continuously (24 hours).
Input a numerical value (in minutes) to dictate how
often a timed capture event occurs. Minimum
allowable value is 1, maximum is 1440.
Once a Day Takes one photo at a defined time.
Scheduled Schedule photo capture by entering a value in minutes
in
Take Photo Every. Minimum allowable value is 1,
maximum is 1440. Input what time the capture event
occurs between using the start and end time values.
Lens Position
Checkbox Select 1- 4 lens positions for the capture. See Section
12.5
Lens Position. Selecting the green position title
opens the Lens Position modal to edit the selected lens
position.
Enable Photo
Capture
Toggle Initiates the capture of photos and opens the photo
capture settings.
Take a Single
Photo Set to capture one photo at the set time.
Take a Series of
Photos Enter the Number of Images and Interval in Seconds
(time between photos) to create a photo burst.
Maximum allowable value is 60. This applies to each
lens position, so with all 4 lens positions activated, it
will take 240 photos.
Save to Camera
Memory
Toggle Selecting Save to Camera enables the photo to be
stored to the camera memory.
Max Space (MB) Enter desired size (MB) out of 15185 MB.
Entering a value of ‘0” will auto allocate as much
space as possible.
Camera Memory
Management
Type Fill and Stop will stop recording additional photos
once the camera memory is full or the allocated
memory size is reached.
Continuous Overwrite management will start deleting
the oldest files once the camera memory is full or the
allocated memory size (max space setting from above)
is reached.