Campbell CC5MPXWD, Instruction Manual

Page: 28 / 126

CC5MPX Digital Camera
16
TABLE 8-1. Power and I/O Cable Color Connections
Color Function Connection
Black Power Ground System Ground
Red Input Power Power Source 9-30 Vdc
Green RS-232 TX (output)
RS-232 Input (RX control port of
datalogger or Pin 2 of a computer (DTE)
DB9 Connector)
RS-485A when configured to RS-485
White RS-232 RX (input)
RS-232 Output (TX control port of a
datalogger or pin 3 of a computer (DTE)
DB9 connector)
RS-485B when configured to RS-485
Yellow
Communication
Switched Power
(Output)
This line is intended to power a
communication device. The camera
switches the input power voltage to this
line.
Blue
External Trigger
(Input)
Connect to external signal source (i.e.
datalogger control port). The external
signal wakes up or initiates image/video
acquisition.
Clear Shield Shield/Earth Ground
Refer to Section 8.5 ,
Internal Jumpers
(p. 76)
, if the current RS-232 or RS-485
interface option needs to be changed in the camera.
Refer to TABLE 8-2 to help determine which wires will need to be connected
for the camera application.