Campbell CC5MPXWD, Instruction Manual

Page: 14 / 126

CC5MPX Digital Camera
2
2. Precautions
•
READ AND UNDERSTAND the Safety section at the front of this
manual.
• The CC5MPX is a precision instrument containing glass components. Do
not subject to physical shock or drops.
•
Avoid strong magnetic fields.
• Store SD memory cards in a case to protect them.
• Do not attempt to disassemble components.
•
Use a blower or proper soft cloth to clean the lens.
• Do not exceed voltages as defined in Section 6.1 , Specifications
(p. 11)
.
• Desiccant and O-rings should be replaced every two years.
•
WARNING: Installations requiring camera to be mounted on tripods,
towers and other elevated structures require following safety guidelines of
those structures.
3. Initial Inspection
•
When the CC5MPX is first received, inspect the packaging and contents
for damage. If any damage is found, file a damage claim with the shipping
company.
• Immediately check the package contents. Thoroughly check all packaging
material for product that may be concealed. Check model numbers, part
numbers, and product descriptions against the shipping documents. Each
product will is identified with a printed model number or part number. On
cabled items, the number is often found at the end of the cable that
connects to the measurement device. The Campbell Scientific number may
differ from the part number or model number printed on the sensor by the
sensor vendor. Ensure the expected lengths of any cables ordered are
correct. Contact Campbell Scientific immediately if there are any
discrepancies.
•
Check the firmware version of the camera against the most recent version
found on the Campbell Scientific website in the CC5MPX support tab and
update as needed.
4. QuickStart
Ensure that the pigtail end of the power cable is properly terminated (see
Section 8.1 ,
Cables/Wiring
(p. 15)
) before connecting the power cable connector
to the camera. If the power supply has an on/off switch, it is also recommended
to switch the power off before connecting the power connector to the camera.
For the initial power up and set up of the camera, it is useful to unscrew the
protective cap that protects the push button and LED indicator.