Active GPS antenna:
SMA female
RX radio:
4-pin spring clip (power, ground, data, channel select)
TX radio:
5-pin spring clip (power, ground, PTT, data, channel select)
Dimensions:
19.0 x 10.0 x 3.2 cm (7.5 x 4 x 1.25 in)
Weight:
600 g (1.3 lb)
3. Configuration
A2Control software allows users to view received messages, configure the AL205R/AL205B, and
transmit messages. The software is available for download from
www.campbellsci.com/downloads?term=A2Control&b=4
.
CAUTION:
The A2Control version must match the AL205R/AL205B firmware version. For example, use
the A2Control-1.4.0.exe version with an AL205R/AL205B using firmware version 1.4.0. Previous
and current versions of A2Control are available at
www.campbellsci.com/downloads?term=A2Control&b=4
. Both the AL205R/AL205B firmware
update and A2Control are provided on the product webpages (
or
).
1. Connect your computer to the console port on the AL205R/AL205B using a USB cable.
2. Apply power to the AL205R/AL205B.
3. Launch A2Control. The following warning is displayed if the versions do not match.
4. If there is only one attached serial port, A2Control will select it by default. Otherwise, select
the appropriate serial port from the Serial Port drop down menu and click Connect.
AL205R / AL205B ALERT2 Repeater / Base
5
