Campbell 52202, Instruction Manual

Page: 10 / 26

52202 Electrically Heated Rain and Snow Gage
4. Quickstart
Short Cut is an easy way to program your datalogger to measure the 52202 and
assign datalogger wiring terminals. The following procedures shows using
Short Cut to program the 52202.
1. Install Short Cut by clicking on the install file icon. Get the install file
from either www.campbellsci.com , the ResourceDVD, or find it in
installations of LoggerNet , PC200W , PC400 , or RTDAQ software.
2. The Short Cut installation should place a Short Cut icon on the desktop of
your computer. To open Short Cut , click on this icon.
3. When Short Cut opens, select New Program .
2