Model 109 Temperature Probe
11
9.3 Calibration
If needed, an estimate of the interchangeability error for 0 to 50 °C, that can be
used as the
Offset
parameter of the
Therm109()
instruction, can be determined
with a 1-point or 2-point calibration. Calibration of the 109 probe is not
necessary unless the accuracy needed in the sensor data requires correction of the
thermistor interchangeability offset described in Section
(p. 4)
.
10. Attributions and References
Santoprene
®
is a registered trademark of Exxon Mobile Corporation.
Measurement Specialties™ is a trademarked global designer and manufacturer
of sensors and sensor-based systems.
EPA installation standard:
Quality Assurance Handbook for Air Pollution
Measurement Systems – Volume IV: Meteorological Measurements Version 2.0
WMO standard:
WMO No. 8, Seventh edition, 6 Aug 2008 Guide to
Meteorological Instruments and Methods of Observation