background image

BUILT TO LAST

Gasoline Powered
Horizontal Pressure
Washers

Product Manual

PW2220, PW3005, PW3221, PW3228, PW3520

Carefully read and understand these instructions before

operating your pressure washer.

© 2003 Campbell Hausfeld/Scott Fetzer

IN462600AV 8/03

Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Safety and Warning Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Assembly and Pre-Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5

Startup, Operation, Shutdown, and Storage . . . . . . . . . . . . . . . . . . . . . . . . 6 - 10

Maintenance and Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 11

Troubleshooting Chart  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 13

Service Record and Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Contents

Page

For parts, product & service information

visit 

www.chpower.com

Please record Model No. and Serial No. for use when contacting
the manufacturer:

Model No.

______________

Purchase date ____________________

Serial No.

______________

Purchase place

____________________

For Information About This Product, call 1-800-330-0712

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

See Warranty on page 14 for important information about commercial use of this product.

Summary of Contents for PW2220















Reviews: