FT-295 Falling Water II Fountain
Assembly Instructions
rev 3/30/2020
Fountain Information:
• Two people are recommended for the installation of this fountain!
• This fountain holds approximately 20 gallons of water.
• This fountain uses a large fountain cover: FTNCOV-LG
• Compatible with Refill Device and LED kits
• A special stopper is not required to use the refill kit for this fountain
Pump Information:
OEMPF525 - 525 GPH Pump (16 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Pump Kit Parts List
Image
Component
Quantity
PK500 Pump
(use adapter indicated)
1
12" length of 1/2" non-kink hose
1
2" length of 5/8" clear vinyl tubing
1
2" piece of 1/2" CPVC pipe
1
Hose Clamps
1
2.8 oz. tube of silicone
1
Copper Spiller
1
Wedges
3
Fountain Components
Image
Item Description
Component
Item #
Quantity
Falling Water II
Fountain Water
Feature
FT-286A
1
Falling Water II
Fountain Spiller
Stopper
FT-286B
1
Falling Water II
Fountain Pump
House
FT-286C
1
Falling Water II
Fountain Pump
Door
FT-286D
1
Falling Water II
Fountain Basin
FT-286F
1
Falling Water III
Fountain Base
FT-288E
1
Proudly
MADE IN USA
