Fountain Components
Image
Item Description
Component
Item #
Quantity
Large Girona
Fountain
Water Feature
FT-300A
1
Alta Girona
Fountain - Disc
FT-395B
1
Alta Girona
Fountain - Basin FT-395C
1
FT-395 Alta Girona Fountain
Assembly Instructions
rev 6/30/2022
Fountain Information:
• This fountain holds approximately 55 gallons of water.
• This fountain uses a medium fountain cover: FTNCOV-MED
• Compatible with Refill #10 Device
• (A different style stopper may be requested for this part)
Pump Information:
OEMPF800 - 800 GPH Pump 16 FT cord length
Tools Required:
Bubble Level
Screwdriver
Pump Kit Parts List
Image
Component
Quantity
PK800 Pump
(use adapter indicated)
1
#10 Stopper
1
Approx. 25" length of 5/8" black
non-kink tubing
1
Approx. 3" length of 7/8" clear vinyl
tubing
1
Wedges
3
Hose Clamps
1
Fountain Set-Up:
Assembly & Installation -
A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is
installed properly, please read our instructions and tips before you begin.
Step 1 - Seek Professional Help:
Check if professional installation is recommended for your fountain.
Step 2 - Check Foundation:
Place your fountain on a level surface. It is recommended to place your fountain on concrete or a hard packed
gravel pad. If the base is level but some components seem off, rotate components or use wedges to level them.
Step 3 - Create a Drip Loop:
To prevent water from dripping down the cord and damaging the electrical socket, create a drip loop by allowing
the pump power cord to fall below the wall outlet.
Step 4 - Use a GFCI Outlet:
Use only a GFCI outlet when running a fountain.
Proudly
MADE IN USA
