Use and Maintenance Manual – Original
Instructions Rev.: 02, Data 11/02/2021
Pag. 19
2
SAFETY PRECAUTIONS
2.1 Precautions
WARNING!
The Constructor declines all responsibilities if the precautions below are not taken.
The accomplishments concerning working environment safety and health regulations indicated by the current
laws (2003/10/CE Directive, 2002/44/CE Directive and 81/2008 Law Decree) have to be carried out either by the
end-user or by the employer: supplying the adequate individual protecting devices, informing about working
risks, performing sanitary survey, etc…
The over-exposure to the vibrations may cause neurovascular lesions to people suffering from circulatory disor-
ders. In case of symptoms which could be referred to, such as an over-exposure, a specialist has to be contact-
ed. These symptoms can be torpor, loss of sensitivity, sharp pains, itch, strength reduction or loss, complexion
discoloration or structural modifications. This usually happens in one’s hands, wrists and fingers.
2.1.1
Results of the tests carried out according to the Laws
WARNING!
Risks due to the operator’s contact with the tool and/or machine noise and vibrations.
Products: the following is a list of the possible unit combinations in order to create the most adequate tool for
the task to be carried out.
Assembling possibilities
1– Power Unit “Power 58”
2– Short fixed extension pole
6– Alice harvesting head
3– Long fixed extension pole
4– Medium telescopic extension pole
7–Hercules harvesting head
5– Long telescopic extension pole
8–Holly harvesting head
9–Icarus harvesting head
