CAMPAGNOLA KRONOS, Use And Maintenance Manual

Page: 29 / 332

Page 28
Use and maintenance manual – Translation of
original Instruction. : 01 date 15/12/2021
3.2 Product description
The chain pruner is a tool which is used for cutting and pruning orchards, vineyards, citrus and olive trees and similar plants.
The tool is operated by a lithium battery, carried in a specific backpack to wear. The battery capacity (Amps) determines
only the work autonomy. The tool is fitted with a power unit with an ergonomic handle (1), a fixed extension pole (23) and
an 8” bar (15) with ¼” chain (16).
The power unit is endowed with an ergonomic handle (1), a control keyboard (4), an electronic board and a brushless motor.
The control keyboard (4) drives the tool functions, the ON/OFF switch (5), which determines the tool switching on and off,
the speed selectors (6) with 6 speed choices and the power LED light (12). A power-supply cable (13) is fitted on the handle
(1) and connects the tool to the battery.
The tool has been designed and manufactured exclusively for the purposes mentioned above.
3.3 Parts supplied
- Quick guide
- Set of maintenance tools
- Chain sharpening file
3.4 Intended use
The tool has been designed for cutting and pruning according to the above-described manners and limits.
• Any other use must be considered improper and potentially dangerous for the operators’ safety. This would
make any warranty claims void.
• If it is not used for the purposes it was designed for, the tool may cause serious injuries to personnel and
bystanders and damages to equipment and things.
3.5 Tool composition