CAMPAGNOLA GSM 60, Use And Maintenance Manual

Page: 23 / 104

Page 22 Use and Maintenance Manual – Original
Instructions Rev.: 04, Date 20/06/2018
3.3 Supplied parts
• Use & Maintenance Manual.
• Hook with rubber rolls (24).
• Shoulder strap (37).
• Service tools bag.
• Maintenance.
3.4 Recommended use
The tool has been designed and manufactured for harvesting in the indicated ways and with the specified operational lim-
its.
WARNING!
•
Any other use has to be considered inadequate and, therefore, potentially dangerous, so it voids the warranty.
•
Any other kind of use, differing from the ones mentioned above, may cause dangers to the tool and to other
things and injuries to people.
3.5 Specifications
• Engine displacement: ..........................................................................52.5 cm3
• Power: .................................................................................... 2.8 HP - 2.1 kW
• Max rpm: ........................................................................................10500 ± 300
• Electronic coil with rpm limiting device: ......................................................YES
• Engine tank capacity: ........................................................................ 1400 cm3
• Weight without extension pole............................................................. 13.50 kg
• Overall dimensions (height - length - width): .................... 300 x 850 x 270 mm
3.6 Safety devices
• Extension pole guard (19): Protects the operator from the movement of the extension pole.
• Muffler guard (7): Protects the operator from burns.
3.7 Tool parts
Pos. Denomination Function Photo
1
Serial number plate Indicates the identification details
A
2
Engine starting lever Is pulled to start the engine up
A
3
Internal-combustion engine Transmits motion to the tool
A
4
Clamp connection It connects the belt to the grip
A
5
Handgrip Is fitted with the accelerator lever and the control switch
A
6
Band Joins the shoulder strap to the handgrip
B
7
Muffler guard Protects the operator from burns
A
8
Oil level indicator Allows to check the oil quantity
A
9
Oil tap Is used to fill the tank with oil
A
10
Handgrip on/off switch Is used to start or stop the engine
A
11
Filter plate Shows when the filter is to be cleaned
B
12
Accelerator lever Operates the tool
B
13
Hips protection Protects the operator from the tool movements
B
14
Engine tank Contains the fuel for the engine
B
15
Tank plug Is used to fill up the tank and prevents fuel from coming out
B
16
Tubular grip Is used to hold the tool
B
17
Rubber-coated handgrip Makes the tool easy to be handled
B
18
Tool holder Holds the tool when it is not used
B
19
Extension pole guard Protects the operator from the movement of the extension pole
B
20
Warning label Indicates the lubrication
C
21
Lubrication holes They allow lubricating the guides
D
24
Hook Is used to shake branches
I-L
25
Extension pole handgrip Is used to handle the extension
I
26
Extension pole Connects the tool with the hook
I