Put the caps (24,25,26,27) on top
of the aluminums.
Step 19.
Step 17.
After final adjustment, the door should be
in place. Drill 1/8'' holes in the wall jambs
through the predrilled holes on the fixed
panel and secure with screws (18).
Put the screw covers on top of screws
(19).
24
hours
Step 20.
Caulk outside of the shower with waterproof silicone and leave
it for drying for at least 24 hours.
outside of the shower
Step 18.
Drilll 1/8'' holes inside the catching
profile by the top and bottom predrilled
holes to secure the catching profile to
the fixed panel. Put the screw covers
on the top.
7
inside of the
ST3.9x8
5/32
"
×
5/16
"
9731
INSTALLATION MANUAL
The following substances or articles may cause physical
harm and/or damage the shower door.
Do not use them for cleaning.
Acid and alkaline solvents, chemicals such as hydrochloric
acid, acetone thinner, solvents, cleansers, or polishers,
nylon brooms or sandpaper.
Maintenance tip:
Dear customer, should you have any questions,
please contact your distributor immediately; for
more information, please visit our
website: www.acritec.com
