Camille Bauer GOSSEN METRAWATT GEOHM C, Operating Instructions Manual

Page: 69 / 236

GMC-I Messtechnik GmbH 33
www.gossenmetrawatt.com (
→
Services
→
DKD Calibration Center or
→
FAQs
→
Calibration questions and answers).
By having your measuring instrument calibrated regularly, you fulfill the
requirements of a quality management system per DIN EN ISO 9001.
* Verification of specifications or adjustment services are not part of the calibra-
tion. For products from our factory, however, any necessary adjustment is frequently
performed and the observance of the relevant specification is confirmed.
9 Repair and Replacement Parts Service,
DKD Calibration Center* and Rental Instrument Service
If required please contact:
GMC-I Service GmbH
Service Center
Thomas-Mann-Str. 20
90471 Nürnberg, Germany
Phone +49 911 817718-0
Fax
+49 911 817718-253
E-mail: service@gossenmetrawatt.om
This address is only valid in Germany.
Please contact our representatives or subsidiaries for service in other
countries.
* Calibration Laboratory for Electrical Quantities DKD–K–19701
accredited per DIN EN ISO/IEC 17025:2005
Accredited measured quantities: direct voltage, direct current values, DC
resistance, alternating voltage, alternating current values, AC active power, AC
apparent power, DC power, capacitance,frequency and temperature
Competent Partner
GMC-I Messtechnik GmbH is certified in accordance with
DIN EN ISO 9001:2000.
Our DKD calibration laboratory is accredited by the Deutscher Kalibrierdi-
enst
(German Calibration Service) in accordance with DIN EN ISO/
IEC 17025:2005 under registration number DKD–K–19701.
We offer a complete range of expertise in the field of metrology: from
test
reports and proprietary calibration certificates right on up to DKD calibration
certificates .
Our spectrum of offerings is rounded out with free test equipment manage-
ment .
An on-site DKD calibration station is an integral part of our service depart-
ment. If errors are discovered during calibration, our specialized personnel
are capable of completing repairs using original replacement parts.
As a full service calibration laboratory, we can calibrate instruments from
other manufacturers as well.
10 Product Support
If required please contact:
GMC-I Messtechnik GmbH
Product Support Hotline
Phone +49 911 8602-0
Fax
+49 911 8602-709
E-Mail support@gossenmetrawatt.com