50/66
B7 Logger
The
Logger
serves for long-term recordings of
measurement progressions. The user can record
variations of instantaneous values (min/max values) or
mean values. It's also possible to make automatic
meter readings.
Via display the status of the logger can be requested.
This way it's possible to make an assumption how
long the corresponding data recording can continue. If
the endless recording mode is used no specific state
information is available.
logger status
Via the menu item logger in the main menu the state
display of the active data loggers can be entered. If no
logger is active or the option is not implemented, then
after the selection of the menu item logger no further
action is performed.
mean values logger (endless mode)
In this example the recording of mean values with
interval time t1 is active. The logger records data
using the endless mode. Therefore no information
about the usage of the dedicated memory is available.
To go to the state information of other logger types
use
and
.
mean values logger (one-time)
The recording of mean values with interval time t2 is
active. The logger is currently recording. Because the
memory usage is given with 0.4% you know that the
logger uses the one-time recording mode. As soon as
the usage reaches 100% recording will stop.
meters logger
In this example the automatically reading of meter
contents is active. The recording is performed one
time and stops as soon as the dedicated memory part
is used.
