Cameron NUFLO MC-III, User Manual

Page: 47 / 120

47
MC-III™ Panel Mount Flow Analyzer Section 4
Table 4.1—Menus for Configuring Parameters
Configurable Parameter Instrument
Keypad
Configuration
Wizard
Menu Screen
(accessed from
MC-III Main)
For
information,
see page …
Well Name — Step 1 Wellsite
Information
56
LCD Contrast — — System Setup
52
Security Setup — — System Setup 53
Contract Hour — Step 2 System Setup 52
Volume Display (units,
decimal location)
Yes Step 5 Turbine Input 57
Rate Display (units, decimal
location)
Yes Step 5 Turbine Input 57
Input Type Yes Step 3 Turbine Input 58
Input Sensitivity Yes — Turbine Input 58
Input Cut-off Thresholds — — Turbine Input
58
Calculation Period (seconds) — — Turbine Input 58
K-Factor Yes Step 4 K-Factor Entry 59
Multipoint K-Factor — — K-Factor Entry 59
Gas Volume Correction — — K-Factor Entry 61
4-20 mA Output Yes Step 6 4-20 mA Output 65
Pulse Output Yes Step 7 Pulse Output 67
Slave Address Yes Step 8 COM Port 54
Baud Rate Yes Step 8 COM Port 54
Bus Delay — — COM Port 55
Bus Timeout — — COM Port
55