VC Camera Link series
Page 78 of 86
RA14-11A-010
11 Troubleshooting
If no image is displayed on the screen,
Ensure that all the cable connections are secure.
Ensure that the power supply is properly connected.
Ensure that trigger signal is applied correctly when you use external trigger mode.
If images are not clear,
Ensure the camera lens or glass is clean.
Check that the lens aperture is adjusted properly.
If images are dark,
Ensure that your camera lens is not blocked.
Check that exposure time is set properly.
If you identify abnormal operation or overheating sign,
Ensure that the power supply is properly connected.
Stop using the camera when you notice smoke or abnormal overheating.
If the trigger mode is not working correctly,
Ensure that CC1 setting on the grabber board is configured correctly when you use CC1 trigger mode.
Ensure that cable connections are secure when you use external trigger mode.
If you identify the difference between left and right image,
Check whether left and right gain settings are different.
Check whether left and right offset settings are different.
If there is a communication failure between the camera and PC,
Ensure that the camera link cable is connected properly.
Ensure that serial communication settings are configured properly on both PC and frame grabber.
Summary of Contents for vieworks LVC-25MC2-30
Page 1: ......
