VC-5MC-M/C110H User's Manual
Page 99 of 109
Command
Syntax
Return
Value
Description
Set RGB Gain
Get RGB Gain
srg r|g|b n
grg r|g|b
OK
n
Sets the intensity of color pixels.
r|g|b: Red / Green / Blue pixels
n: Gain value (1.0
×
~ 4.0
×
)
Auto White Balance
arg
OK
Automatically adjusts the white balance
once.
Get Model Name
gmn
String
Displays the camera model name.
Get MCU Version
gmv
String
Displays the version of the camera MCU.
Get FPGA Version
gfv
String
Displays the version of the camera FPGA.
Get Serial Number
gsn piece
String
Displays the serial number of the camera.
Get Current Temperature gct
String
Displays the device temperature in
Celsius.
Reset Hardware
rst
-
Resets the camera physically to power off
and on.
Load Config. From
lcf 0|1|2
OK
Loads the camera setting values.
0: Loads the Factory Default Setting.
1: Loads the User 1 Setting.
2: Loads the User 2 Setting.
Save Config. To
sct 1|2
OK
Saves the current camera setting values.
1: Saves to the User 1 Setting.
2: Saves to the User 2 Setting.
Set Config. Initialization
Get Config. Initialization
sci 0|1|2
gci
OK
0|1|2
Specifies setting values to be loaded
when reset.
0: Factory Default Setting
1: User 1 Setting
2: User 2 Setting
Table 10-8 Command List #8
