VC-5MC-M/C110H User's Manual
Page 67 of 109
9.8
Gain and Black Level
Increasing the
Gain
parameter increases all pixel values of the image. This results in a higher
grey value output from the camera for a given amount of output from the image sensor.
1.
Selects the Gain Control (
Digital All
is only available) to be adjusted by using the
Gain
Selector
parameter.
2.
Sets the
Gain
parameter to the desired value.
Adjusting the
Black Level
parameter will result in an offset to the pixel values output from the
camera.
1.
Selects the Black Level Control (
Digital All
is only available) to be adjusted by using the
Black Level Selector
parameter.
2.
Sets the
Black Level
parameter to the desired value. The available setting range varies
depending on the
Pixel Format
settings.
The XML parameters related to Gain and Black Level are as follows.
XML Parameters
Value
Description
Analog Control GainSelector Digital All
Applies the Gain value to all digital channels.
Gain
1.0× ― 32.0×
Sets a digital gain value.
BlackLevel
Selector
Digital All
Applies the Black Level value to all digital
channels.
BlackLevel
8 bit: 0 ~ 15.93
10 bit: 0 ~ 63.75
12 bit: 0 ~ 255.00
Sets a black level value
Table 9-12 XML Parameters related to Gain and Black Level
