18
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
SLAVE MODE CONFIGURATION
Press MODE to access the main menu (--- Menu ---). Using UP and DOWN, select the menu item
Slave
(observe arrow) and confirm with ENTER. Connect the slave and the master units (same
model, same software version) with a DMX cable and enable a standalone mode (Static, Pixel) on
the master unit. The slave unit will now follow the master unit. If there is no control signal, the
display characters will flash. Flashing stops as soon as a control signal is present.
Mode
Slave
---------------- Menu ----------------
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
SYSTEM SETTINGS (SETTINGS)
Press MODE to access the main menu (--- Menu ---). Using UP and DOWN, select the menu item
Settings
(observe arrow) and confirm with ENTER.
---------------- Menu ----------------
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
This will take you to the submenu for setting the following submenu items (selection with UP and
DOWN, confirm with ENTER):
Settings
Wireless
Settings
= W-DMX
settings
(wireless
DMX)
W-DMX On/
Off
On = W-DMX activated
Off = W-DMX disabled
Operating
Mode
Receive = W-DMX module as receiver
Transmit = W-DMX module as transmitter
Transmitting
Mode
G3 = G3 transmission standard
G4S = G4S transmission standard
Link
Link = pair with W-DMX devices. W-DMX must
be activated on all devices and the pairing
must be picked up by a transmitter (Receive
Reset).
Unlink = unpair all devices
Receive
Reset
No = do not retain transmitter pairing
Yes = retain transmitter pairing
