22
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
WEB INTERFACE
As of firmware version 1.03 the XNODE 4 allows the use of a web interface
1
hosted by the device. Through this interface the status may be
observed, settings can be adjusted, and firmware updates can be carried out. The web interface is accessed by typing the devices configu-
red IP address in a web browser of a computer, that is connected to the same network as the XNODE 4.
STATUS PAGE
The status page is the first to welcome the user after accessing the web interface. It lets the user get an overview over every individual
port’s status and configuration at a quick glance. In addition to the overview a toggle switch can be enabled to set the device identified.
The ports can display five different status messages:
OK: The port is receiving/transmitting successfully.
No Update: Not receiving any updates on this universe for the last 10 seconds.
Off: The port is currently disabled through settings made by the user.
No DMX: The port is not receiving/transmitting any DMX.
Error: The port is producing errors and requires user intervention.
•
1
Web interface only available on devices produced after 2017 (hardware rev. 1.0-b)
