IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
7
DMX
Menu
Settings
Settings
Display
ENTER
UP/DOWN
ENTER
UP/DOWN
Backlight
ON
/
Backlight
OFF
ENTER
ENTER
Settings
DMX Fail
DMX Fail
Hold
DMX Fail
Blackout
ENTER
UP/DOWN
/
ENTER
ENTER
Settings
DimCurve
DimCurve
Linear
DimCurve
Exp
ENTER
UP/DOWN
/
ENTER
ENTER
DimCurve
Log
DimCurve
S-Curve
/
ENTER
ENTER
/
Settings
DimResp
DimResp
LED
DimResp
Halogen
ENTER
UP/DOWN
/
ENTER
ENTER
/
/
/
SYSTEM SETTINGS (settings)
To access system settings, press the MODE button repeatedly until "Menu" appears in the top line of the display. Now select the menu item
"Menu Settings" using UP and DOWN and press ENTER. Select the desired sub-menu item using UP and DOWN once again, and confirm with
ENTER (see tables, note sub-menus). Now change the settings as required using UP and DOWN and confirm the changes with
ENTER.
Settings
Display
=
automatic display
shutdown
Backlight ON
= permanently on
Backlight OFF
= display shuts down automatically after approx. 30 seconds
of inactivity
DMX Fail
=
operating status
when DMX signal
fault occurs
Hold
= last command is retained
Blackout
= activates blackout
DimCurve
=
dimmer curve
Linear
= light intensity increases linearly with DMX value
Exp
= light intensity can be finely adjusted at lower DMX values
and broadly adjusted at higher DMX values
Log
= light intensity can be broadly adjusted at lower DMX values
and finely adjusted at higher DMX values
S-Curve
= light intensity can be finely adjusted at lower and higher
DMX values and broadly adjusted at medium DMX values
DimResp
=
dimmer sensitivity
LED
= lamp responds abruptly to changes in DMX value
Halogen
= spotlight responds similarly to a halogen spotlight with soft
brightness changes
linear
DMX value
Light intensity
exponential
DMX value
Light intensity
logarithmic
DMX value
Light intensity
S-curve
DMX value
Light intensity
Dimmer curves
