8
ENGLISH
The data and information provided in this manual are to be considered susceptible to change at any time without warning, by CAME cancelli automatici s..p.a.
Function selector
1 ON -
Automatic Closing
- The automatic closing timer activates at the end of the opening gate run. The pre-set time is adjustable, and
is in any case conditioned by the activation of any safety devices, and does not activate after a total safety “stop” or during a
blackout.
2 ON -
"Open-stop-close-stop"
function with [2-7] button and radio transmitter (fi tted with inserted radiofrequency card).
2 OFF -
"Open-close"
function with [2-7] button and radio transmitter ((fi tted with inserted radiofrequency card).
3 ON -
"Open only"
function with radio transmitter ((fi tted with inserted radiofrequency card).
4 ON -
Pre-Opening and closing fl asher
- Following and opening and closing command, the fl asher connected to [10-E1], fl ashes for 5
seconds before motion begins.
5 ON -
Obstacle detected
- When motor is stopped (gate closed or after a total stop command) it prevents any movement if safety devices,
such as photocells, detect any obstacles.
6 ON -
Maintained action
- The gate works by keeping button pressed (one 2-3P opening button , and one closing button).
7 ON -
Functioning of the photocells’ safety test
- Allows the card to check the efficiency of any safety devices (i.e. photocells) after
every opening or closing command.
8 OFF -
Total stop
- This function stops the gate and then excludes any automatic closing cycle; to set in motion again, use either the
keypad or transmitter. Insert the safety device in [1-2]; If unused, set DIP switch to ON.
9 OFF -
Opening during closing
- If the photocells detect an obstacle during gate’s closing, gate motion is inverted until fully opened;
connect the safety device to terminals [2-C1]; if unused, set DIP switch to ON.
10 OFF -
Partial stop
- Gate stop when obstacle is detected by the safety device; once obstacle is removed, the gate remains still or closes
if automatic closing is activated. Connect the safety device to terminal [2-C3]; if unused, set the DIP switch to ON.
b
8
ENGLISH
The data and information provided in this manual are to be considered susceptible to change at any time without warning, by CAME cancelli automatici s..p.a.
Function selector
1 ON -
Automatic Closing
- The automatic closing timer activates at the end of the opening gate run. The pre-set time is adjustable, and
is in any case conditioned by the activation of any safety devices, and does not activate after a total safety “stop” or during a
blackout.
2 ON -
"Open-stop-close-stop"
function with [2-7] button and radio transmitter (fi tted with inserted radiofrequency card).
2 OFF -
"Open-close"
function with [2-7] button and radio transmitter ((fi tted with inserted radiofrequency card).
3 ON -
"Open only"
function with radio transmitter ((fi tted with inserted radiofrequency card).
4 ON -
Pre-Opening and closing fl asher
- Following and opening and closing command, the fl asher connected to [10-E1], fl ashes for 5
seconds before motion begins.
5 ON -
Obstacle detected
- When motor is stopped (gate closed or after a total stop command) it prevents any movement if safety devices,
such as photocells, detect any obstacles.
6 ON -
Maintained action
- The gate works by keeping button pressed (one 2-3P opening button , and one closing button).
7 ON -
Functioning of the photocells’ safety test
- Allows the card to check the efficiency of any safety devices (i.e. photocells) after
every opening or closing command.
8 OFF -
Total stop
- This function stops the gate and then excludes any automatic closing cycle; to set in motion again, use either the
keypad or transmitter. Insert the safety device in [1-2]; If unused, set DIP switch to ON.
9 OFF -
Opening during closing
- If the photocells detect an obstacle during gate’s closing, gate motion is inverted until fully opened;
connect the safety device to terminals [2-C1]; if unused, set DIP switch to ON.
10 OFF -
Partial stop
- Gate stop when obstacle is detected by the safety device; once obstacle is removed, the gate remains still or closes
if automatic closing is activated. Connect the safety device to terminal [2-C3]; if unused, set the DIP switch to ON.
b
