Page 1 of 1
CM-300 Series
Exit Switch
INSTALLATION INSTRUCTIONS
Door Activation Devices
Camden CM-300 series illuminated Exit
switches are available with stainless-steel
single-gang faceplate (CM-300), or with
Narrow jamb size faceplate (CM-310).
The 1/2” x 3/4” illuminated translucent button
is easy to push, and supplied in momentary or
maintained models. Red buttons are standard
but blue and green are also available.
The supplied LED will work on 12 volts, or
24 volts (using supplied inline resistor).
1. GENERAL DESCRIPTION
2. SPECIFICATIONS
Models
CM-300
CM-310
Dimensions
2.75” W x 4.5” H x 1 5/16”
(70mm x 114mm x 33mm)
1.75” W x 4.5” H x 1 5/16”
(44mm x 114mm x 33mm)
Contacts
Mom. / Maint.
Switch
Rating
10 amps @ 125 VAC
Electrical
Life
100,000 @ rated capacity
Mounting
2 x #6-32 machine screws
Lens
Colour
Red, Green, or Blue
Legend
'EXIT'
LED
Voltage
12 or 24 V DC
2. INSTALLATION
Mounting
1. The colour coded leads are permanently soldered onto the
back of the switch. The Red & Black wires are for the light.
2. For normally open circuits use the Blue & Green wires.
For normally closed circuits use the Yellow & Green wires.
3. Tuck wiring into box and fasten switch plate using screws
provided (CM-300), or tuck wiring into frame and fasten to
frame using screws provided (CM-310).
3. WARRANTY
Camden Door Controls guarantees the CM-300 series to be
free from manufacturing defects for 3 years from date of sale.
If during the first 3 years a CM-300 series switch fails to perform
correctly, it may be returned to our factory where it will be
repaired or replaced (at our discretion) without charge. There
is no warranty for bulb damage due to over voltage! Except as
stated herein, Camden extends no warranties expressed or
implied regarding function, performance or service.
CM-300RE
CM-310E
