EDGE
M
11
Technical specification
Continuous power output:
200W RMS into 8 Ohms
350W RMS into 4 Ohms
THD (unweighted):
<0.002% 1kHz at rated power (8 Ohms)
<0.02% 20Hz – 20kHz at rated power (8 Ohms)
Frequency Response:
<3Hz – >80kHz +/-1dB
S/N ratio (ref 1W into 8 Ohm):
>93 dB
S/N ratio (ref max power):
>115 dB
Gain:
28dB (RCA)/ 22dB (XLR)
Input sensitivity:
1.6V RMS (RCA) / 3.5V RMS (XLR)
Input impedances:
balanced 47k Ohm
unbalanced 47k Ohm
Inputs:
Balanced, Unbalanced
Outputs:
Speaker, Loop out
Max power consumption:
1000W
Standby power consumption:
<0.5W
Dimensions:
150 x 460 x 405mm
(5.9 x 18.1 x 15.9")
Weight:
23.6kg (52.0lbs)
There is no power
• Ensure the AC power cord is connected securely.
• Ensure the plug is fully inserted into the wall socket and is switched on.
• Check fuse in the mains plug or adaptor.
There is no sound
• Make sure the unit is not in Standby mode.
• Check that source component is properly connected.
• Check that your speakers are properly connected.
There is no sound on one channel
• Check speaker connections.
• Check interconnects.
There is weak bass or diffused stereo imaging
• Ensure that speakers are not wired out of phase.
There is a loud buzz or hum
• Ensure no interconnects are loose or defective.
Troubleshooting
If you experience any trouble with your Edge M, visit the help section on our
webpage at
http://techsupport.cambridgeaudio.com
