Cambridge Audio C11260K, Manual

Page: 9 / 29

9
Rear panel connections
Last updated: July 27, 2023 10:04. Revision #10129
1. Line output.
Analogue output used to provide a signal to an integrated amplifier, pre-amp or recording device.
2. S/P DIF coaxial digital output.
3. WiFi and Bluetooth antenna
Ensure both antennas are connected securely before use.
4. TOSLINK digital output.
5. Service port.
For servicing use only.
Do not connect anything here as it may result in damage.
6. USB Sockets
Connection for USB HD/flash disk, the USB ports are not intended for connection to Apple mobile devices, no functionality, charging or otherwise, is
supported.
7. WiFi antenna
8. Ethernet
Use to connect the MXN10 directly to a router.
9. AC Power Socket
Once you have completed all connections to the amplifier, plug the AC power cable into an appropriate mains socket then switch on.