Chapter 6: Configuration and alignment
SNMP pages (for SNMPv3)
Page 6-96
Table 186 Step 4: SNMP User Accounts Configuration attributes (for SNMPv3)
Attribute
Meaning
Name
Name to be used by the SNMP user to access the system.
Role
Selects which of the two web-based security profiles are applied to this
user: System administrator or Read only.
Select Disabled to disable the SNMP account.
Auth/Priv
Indicates whether the Passphrase applies to authentication or privacy
protocols.
Passphrase
The phrase to be entered by this SNMP user to access the system using
an authentication or privacy protocol. Length must be between 8 and 32
characters. May contain spaces.
The Auth Passphrase is hidden when Security Level for this user’s Role
is set to No Auth No Priv.
The Priv Passphrase is hidden when Security Level for this user’s Role is
set to No Auth No Priv or Auth No Priv.
Passphrase Confirm Passphrase must be reentered to confirm it has been correctly typed.
Step 5: SNMP Trap Configuration (for SNMPv3)
Menu option: Management > SNMP. Part of the SNMP Wizard (
This page is only displayed when SNMP Security Mode is set to Web-based in the Step 1:
SNMP Configuration page. Use this page to configure the events that will generate SNMP traps
and to set up trap receivers.
