PTP 450 Backhaul Radio
PTP 450 Configuration and User
pmp-0815 (August 2015)
1-7
Table 2
BHM/BHS interface descriptions and cabling – 3.5 GHz, 3.6 GHz, 5 GHz
Interface
Function
Cabling
Ethernet
Power-over-Ethernet, Ethernet
communications (management and data)
RJ45 Cable
Default
Default Plug port
Default plug
External
antenna
Path A RF
Port
3.5 GHz
-45 degree RF connection to
BHM antenna
50 ohm RF cable,
N-type
3.6 GHz
-45 degree RF connection to
BHM antenna
5 GHz
Vertical RF connection to
BHM antenna
External
antenna
Path B RF
Port
3.5 GHz
+45 degree RF connection to
BHM antenna
50 ohm RF cable,
N-type
3.6 GHz
+45 degree RF connection to
BHM antenna
5 GHz
Horizontal RF connection to
BHM antenna
Ground Lug For grounding the unit (rear of unit,
connectorized only)
10 AWG copper
wire
A PTP450 can be connected to a CMM, but does not receive sync over the RJ45 port.
The LED display of the 3.5 GHz and 3.6 GHz Radio’s appear a bit different from the
existing 5 GHz 450 Radio’s.
