ii
ptp-450 (July 2014)
PTP 450 module essential information
Default IP Address for Management GUI Access
169.254.1.1
Default Administrator Username
admin
Default Administrator Password
(no password)
Software Upgrade Procedure
See
“Updating the software version and using CNUT”
in the
PMP 450 Configuration and User Guide
Resetting to Factory Defaults (2 options)
1.
On the radio GUI, navigate to
Configuration
,
Unit Settings
and select
Set to Factory Defaults
OR
2.
On the radio GUI, navigate to
Configuration
,
Unit Settings
and enable and save option
Set to
Factory Defaults Upon Default Plug Detection
.
When the unit is powered on with a
default/override plug (see section “Acquiring the
Override Plug” in the
PMP 450 Configuration and
User Guide
) the radio will be returned to its
factory default settings.
Summary of Contents for PTP 450 series
Page 1: ...Cambium PTP 450 User Guide System Release 13 2...
Page 20: ......
