Cambium PTP 450 series, User Manual

Page: 135 / 180

PMP 450 Configuration and User Guide Glossary
ptp-450 (July 2014)
4-115
BHS specifications
The PTP 450 BHS conforms to the specifications listed in Table 50 . These specifications apply to all PTP
450 product variants.
Table 50 BHS physical specifications
Category Specification
Product
Model
Number
3.5 GHz C035045C001A, C035045C002A, C035045C003A, C035045C004A,
C035045C005A, C035045C006A, C035045C007A, C035045C008A
3.6 GHz C036045C001A, C036045C002A, C036045C003A, C036045C004A,
C036045C005A, C036045C006A, C036045C007A, C036045C008A
5 GHz C054045C001A, C054045C002A, C054045C003A, C054045C004A,
C054045C005A, C054045C006A, C054045C007A, C054045C008A,
Spectrum
Channel
Spacing
5 MHz
10MHz, 20
MHz channel
bandwidth
Configurable on 2.5 MHz increments (5 GHz)
Configurable on 50 kHz increments (3.5 GHz, 3.6 GHz)
Frequency
Range
3.5 GHz 3300 – 3600 MHz (dependent upon Region Code setting)
3.6 GHz 3550 – 3800 MHz (dependent upon Region Code setting)
5 GHz 5470 – 5875 MHz (dependent upon Region Code setting)
Channel Width 5 MHz (3.5GHz, 3.6GHz and 5.8GHz only), 10 MHz or 20 MHz
Interface
MAC (Media Access
Control) Layer
Cambium Proprietary
Physical Layer 2x2 MIMO OFDM
Ethernet Interface 10/100BaseT, half/full duplex, rate auto negotiated (802.3 compliant)
Protocols Used IPv4, UDP, TCP, IP, ICMP, SNMP, HTTP, FTP, RADIUS
Network Management HTTP, FTP, SNMP v2c, Syslog
VLAN 802.1ad (DVLAN Q-in-Q), 802.1Q with 802.1p priority, dynamic port VID
Performance