Chapter 4: Managing device via cnMaestro
Preparing the device
Page
4-2
Preparing the device
The prerequisites at device side are:
1
Power on the cnPilot.Home R200/201. Configure the IP Address using either the DHCP or
Static mode.
2
Check for the Internet connectivity. This is required, as the device needs to communicate
with the cnMaestro Server hosted in the AWS.
3
Allow the IP Addresses of the devices in the Firewall Server using an ACL. Also, enable
the protocols like HTTP/HTTPS and SSL.
This is required as the device communicates with the cnMaestro Server using web
sockets and for security reasons SSL certificates are exchanged between the device and
the cnMaestro Server. The cnMaestro uses
s3.amazonaws.com
link to download
software images for device firmware upgrade
4
By default, the cnMaestro Server URL will be configured in the devices for
communication with cnMaestro. The default URL is
https://cloud.cambiumnetworks.com
Summary of Contents for cnPilot Home R200
