Chapter 12: Getting Started (CLI)
Configuring the Radio (MRMC) Script(s) (CLI)
phn-3963_008v000
Page 12-15
Configuring the Radio (MRMC) Script(s) (CLI)
Multi-Rate Multi-Constellation (MRMC) radio scripts define how the radio utilizes its available capacity. Each script
is a pre-defined collection of configuration settings that specify the radio’s transmit and receive levels, link
modulation, channel spacing, and bit rate. Scripts apply uniform transmit and receive rates that remain constant
regardless of environmental impact on radio operation.
Note
The list of available scripts reflects activation-key-enabled features. Only scripts within your
activation-key-enabled capacity will be displayed.
Displaying Available MRMC Scripts (CLI)
To display all scripts that are available for a specific radio carrier in your unit:
Use the following command to enter radio view:
root> radio slot 1 port 1
Enter the following command in radio view:
radio[1/1]>mrmc script show script-type <script-type> acm-support <acm-
support>
Note:
The list of available scripts reflects activation-key-enabled features. Only scripts
within your activation-key-enabled capacity will be displayed.
Table 55: MRMC Script CLI Parameters
Parameter
Input Type
Permitted
Values
Description
script-type
Variable
Normal
asymmetrical
Determines the type of scripts to be displayed:
•
normal
– Scripts for symmetrical bandwidth.
•
asymmetrical
– Scripts for asymmetrical bandwidth.
Note:
Asymmetrical scripts are not supported in this release.
acm-support
Boolean
Yes
no
Determines whether to display scripts that support Adaptive Coding
Modulation (ACM). In ACM mode, a range of profiles determines Tx
and Rx rates. This allows the radio to modify its transmit and receive
levels in response to environmental conditions.
The following command displays available symmetrical (normal) scripts: